Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to use ADS optimality analysis can be more effective

Status
Not open for further replies.
J

John_li

Full Member level 5
Joined
Aug 6, 2005
Messages
272
Helped
9
Reputation
18
Reaction score
1
Trophy points
1,298
Activity points
2,945
Hi all,
I used ADS2008 to simulate wilkinson power splitter.i want to get the following figure parameter:S11,S22<-20dB,S32<-30dB,S21<-3dB.I run optimality analysis for a long time,but can not get the result.It took me many time to run it for lackness the experience of microstrip optimization,anyone kindly guide me how to run microstrip optimization can be more effective?
Thank you in advance,
 

You have made a simple typing error. TL3 has a W value of W11 (metres) whereas it should be W11 mm. Fix this error and the optimization will run as expected.
 

    J

    John_li

    Points: 2
    Helpful Answer Positive Rating
oh .sorry for make a mistake .Thank realAEL's help .
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top