Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[PIC] how to transmit and recieve variable from pic to matlab guide

Status
Not open for further replies.
R

rostom

Newbie level 1
Joined
May 7, 2015
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
6
hi every one i have project to mesure temperature with lm35 and pic16f877a (mikroc program) and rs232 for interfacing with matlab guide i have a problem,how can i send temperature value (it contain 2byt ) from USART to matlab (chr or int or str ) tnx a lot for answering
 

You can use USB serial ports, provided that you connect the device before you start MATLAB, and provided that you are okay with the latency being 40 milliseconds per USB packet (unless the packet is full, somewhere around 1022 bytes.)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top