Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to test the standby current?

Status
Not open for further replies.

holddreams

Full Member level 6
Joined
Aug 2, 2005
Messages
351
Helped
15
Reputation
30
Reaction score
7
Trophy points
1,298
Location
Shanghai
Activity points
4,243
Can anyone explain what's the standby current?
And what't the standby power consumption?
How to test them?
In postlayout simulation, we can plot the current curve of VDD,and measure the RMS value of the current( I(rms)), and calculate VDD*I(rms)=P(power)
So,what's the meaning of P(power)?Dynamic power consumption or standby power consumption?

Thanks.
 

huojinsi

Full Member level 5
Joined
Jan 21, 2005
Messages
256
Helped
25
Reputation
50
Reaction score
6
Trophy points
1,298
Activity points
2,216
what's the standby current?
The standby current means flowing out of the GND pin at idle mode
what't the standby power consumption?
the standby power consumption means power dissipation of ckt at idle mode. power consumption equate Vin*Ignd or Vcc*Ignd.
 

alok_ky

Full Member level 1
Joined
Aug 24, 2005
Messages
96
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,288
Location
bangalore india
Activity points
2,071
when the system is in sleep mode, then the current consumed from the power supply current is called standby current.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top