Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to test the CD-ROM performance?

Status
Not open for further replies.

marmin

Junior Member level 3
Joined
Oct 29, 2004
Messages
26
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
158
CD ROM

I have an old CD rom which does not work very properly.I mean it doesn't read the CDs very well and read the CDs slowly and with difficulty.
What should I do to test it?
thanks
 

CD ROM

Hi. Try to clean it with cleaning disk.

Best Regards.
 

Re: CD ROM

Try to figure out if there's any software problem, i had once similar problem with my PC and found that a virus was actually interfering with my drive.

Also try using some better quality CD for writing, it helps !!!!!
 

CD ROM

Be specific what kind of CDROM

I Meant Type, release date, and what CD u used for?

U Might need to update the firmware for the CD.

And It's worth if u mentioned your computer specification (mainboard etc) in order to get GOOD help.

Best Regard
 

Re: CD ROM

marmin said:
I have an old CD rom which does not work very properly.I mean it doesn't read the CDs very well and read the CDs slowly and with difficulty.
What should I do to test it?
thanks

I thinhk Laser Diode of its is too "old" so intensity of light emitted is not strong enough. You should buy a new other!:D
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top