Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] How to test if RF receiver and transmitter work properly?

Status
Not open for further replies.

saavedra29

Newbie level 5
Newbie level 5
Joined
Jan 10, 2013
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Greece
Visit site
Activity points
1,371
Hello. I've bought two RF modules, a transmitter and a receiver, both at 315 MHz to make 2 microcontrollers talk to each other.
But i have problem making them talk using their serial ports. So i wonder:
Before doing anything else is there a simple way, i.e. a simple circuit to try, that i can be sure that they work properly?
Because it's a loss of time trying to make something work if it has a hardware problem.
Thanks!

The modules are like these

- - - Updated - - -

20 minutes after writing the post i made it work. So the topic is solved.
 
Last edited:

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top