Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to test a POR circuit?

Status
Not open for further replies.
H

holddreams

Full Member level 6
Joined
Aug 2, 2005
Messages
351
Helped
15
Reputation
30
Reaction score
7
Trophy points
1,298
Location
Shanghai
Activity points
4,237
Just add a pulse VDD ,and see the output whether a desired pulse generated?

Anyone can help?

Thanks.

Added after 39 seconds:

Should I add a capacitor as a load on the pcb ?
 

there are many chara. to test.
such as trans. dc. temp, power and so on.
 

The most missed one:

Transient ramp VDD up and down with very wide scale of speed (1ms-1ns). Also partly ramp down below the threshold and up again. I have seen many POR which fail at some time scale.
 

By the way ,when test a pcb,how to test the temperature effects?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top