How to simulate transient power dissipation in DCDC converte

[leonken]

A switched capacitor DC DC converter.
I want to calculate the power dissipation of each switches.
How to simulate the transient power dissipation in DCDC converter with HSPICE?
Thank you.

 

[Hughes]

You may use
.probe I(M1)
to probe the current or
.probe P(M1)
to probe the power dissipation.
Use
.meas tran pm1 avg P(M1)
to calculate the average power dissipation.

 

[leonken]

Re: How to simulate transient power dissipation in DCDC conv

I'm confused by this simulation results.
I used this statement to emulate an ideal switch in Hspice
gs1 in 10 vcr pwl(1) con1 0 0v,10meg 1.0v, 1
the simulation results are:
igs1= 6.9435E-05 from= 1.0000E-05 to= 1.0000E-04
vgs1avg= 2.0040E+00 from= 1.0000E-05 to= 1.0000E-04


pgs1= 2.0003E+07 from= 1.0000E-05 to= 1.0000E-04
The average current and the average voltage seems good. But the average of the switch gs1 is 2.0E7.
what is the problem?