Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to simulate CMRR & PSRR in Hspice ?

Status
Not open for further replies.

vbhupendra

Full Member level 4
Joined
May 11, 2005
Messages
235
Helped
15
Reputation
30
Reaction score
10
Trophy points
1,298
Location
GOA, INDIA
Activity points
3,219
How to simulate CMRR & PSRR in Hspice ?

if anyone has a template netlist for the simulation then it would be very helpful.
 

  • Like
Reactions: 3245

    3245

    Points: 2
    Helpful Answer Positive Rating
hspice cmrr 측정

for PSRR, connect the opamp in unity gain configuration.provide analog groung at i/p.provide ac analysis on vdd.trace the o/p in log domain.this will give you the negative of PSRR.for more details refer to allen hollberg book.

for CMRR,short the i/p with proper i/p offset voltage at either of the i/p such that shorting the i/p and providing analog ground at i/p give analog ground at the o/p.now give ac analysis to the i/p.trace the o/p.it will give you common mode gain.if you are already haiving differential gai.then
CMRR=(differential gain)/(common mode gain).for more details refer to allen hollberg book.
if you are liitle bit helped please do not forget to click "helped me" button.it will not cost you any point.
 
  • Like
Reactions: skoda

    skoda

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top