ian227
Newbie level 6
I am confused about gm=1/50
when I tune the transistor width size and bias to vary gm
I found when gm=0.02 but not to match 50 Ohm Zin real part is not 50
I chose Detailed in s-parameter simulation to watch Gm
what's wrong with my operation?
when I tune the transistor width size and bias to vary gm
I found when gm=0.02 but not to match 50 Ohm Zin real part is not 50
I chose Detailed in s-parameter simulation to watch Gm
what's wrong with my operation?