Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[PIC] How to shifted phases in PIC18f4431

geo2020

Newbie level 4
Joined
May 26, 2020
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
64
I am trying to design a driver for a BLDC motor.

I have managed to generate 6 PWM signals with the PIC18F4431.

How I can shifted the phases?

I attach my code and the image of the PWM signals.

Code:
void pwm_inicialitze(void)
{
  PORTB=0x00;
  TRISBbits.TRISB0=0; 
  TRISBbits.TRISB1=0;
  TRISBbits.TRISB2=0;
  TRISBbits.TRISB3=0;
  TRISBbits.TRISB5=0; 
  TRISBbits.TRISB4=0; 

  INTCON=0XC0;  
  IPR3bits.PTIP=1;
  PIE3bits.PTIE=1;
  PIR3bits.PTIF=0;

  SEVTCMPL=0X00;
  SEVTCMPH=0X00;
  DTCON=8;
  FLTCONFIG=0X00;
  OVDCOND=0XFF;
  OVDCONS=0X00;

  PTMRL=0X00;
  PTMRH=0X00;
  PTCON0=0X00;
  PTCON1=0X80;
  PWMCON0=0X50;
  PWMCON1=0X01;
  PTPERL=124;           
  PTPERH=0;     

  PDC0L=60;         
  PDC0H=0;  
  PDC1L=60;         
  PDC1H=0;  
  PDC2L=60;         
  PDC2H=0;      
  PDC3L=60;         
  PDC3H=0;          

  ADCON0=0x00;
}

void main(void)
{
   ANSEL0=0X00;
   ANSEL1=0X00; 
   pwm_inicialitze();
   while(1);
}
1.JPG
 

Toggle Sidebar

Part and Inventory Search


Welcome to EDABoard.com

Sponsor

Sponsor

Design Fast


×
Top