Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to set up RF Studio to get a pulse send to CC2420DK?

Status
Not open for further replies.

luisfelipe

Newbie level 4
Joined
Sep 4, 2004
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
30
Help Chipcon CC2420DK

Hello fellows,
I am trying to set up my CC2420DK boards in order to connect in one of them a function generator and in the other one an Oscilloscope; the reason is because I want to transmit a signal from one point to the other one using these boards.

My main objective is to transmit a pulse (defined by an user) from one board to the other one, and first I am trying just to send a simple sine from one point to the other in order to know how these boards work.

So, do you have any idea in order to know how to set up the RF Studio (software) parameters to get a pulse at the second board?

I will appreciate all you help.

Thanks
Luis Felipe
 

moneychaser

Junior Member level 2
Joined
Aug 28, 2004
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
180
Re: Help Chipcon CC2420DK

Erm, the 2420 transmits data according to 802.15.4...
 

vsupachai

Junior Member level 3
Joined
Jun 30, 2002
Messages
27
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
97
Re: Help Chipcon CC2420DK

I am not clear about your question. Do you mean you connect sine signal into ADC channel of CPU on board (if any). Then, you write anything to let CPU read analog signal, convert, and send it through RF? But it is still not work?
 

DonJ

Full Member level 2
Joined
Dec 27, 2004
Messages
123
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,298
Activity points
1,012
Re: Help Chipcon CC2420DK

Hello,

I do not think it is possible to send a simple pulse or a sine using these boards, because the chip (CC2420) can only transmit acoording to the modulation format and shaping defined by IEEE 802.15.4 standard.
Why not transmit a random sequence using the on chip modulator? :)

All the best
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top