Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to set the vias in ADS!

Status
Not open for further replies.
D

dopradar

Member level 5
Joined
Oct 8, 2004
Messages
83
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
761
Hi all,

About the via in @DS, I have a problem:

when I use the VIA2(Cylindrical via hole in microstrip) in @DS, there is a range of usage: 100um<H<635um, if I want to set PCBoard height as 1.6mm. How to ensure the model's accuracy?or is there another method for substitute? Thanks!
 

Hi,

VIA2 model is based on the numerical analysis of Goldfarb and Pucel. And limitation of thickness came from this work. For this reason I recommend to use VIA model.
Models of passive components are matured enough. I used microstrip components library till 30GHz. Design was confirmed by HFSS simulation and tesing.

Rgds
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top