Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to set the impedance of the IC for the lumped port in HFSS

Status
Not open for further replies.
W

walter60613

Newbie level 2
Newbie level 2
Joined
Apr 24, 2015
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
18
I have trouble to the HFSS, i have these questions. I would be grateful to anyone who would help me.
I made the hf RFID at 13.56 MHz,now I need to patch antenna with IC ,the IC input capacitance is 97 pF,but the hfss need me to input resistance and reactance so I use ADS to get Zin=50-j121.58Ω ,Is this a right way?



 
Last edited by a moderator:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top