Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to set the impedance for the lumped port in HFSS

Status
Not open for further replies.

hfssuserus

Newbie level 1
Joined
Jun 2, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,286
Hi

I am working on a patch antenna. The input impedance of the chip is 34-j810. I am simulating the antenna by HFSS. When I set the impedance of the lumped port, I found that the initial setting affects the result a lot. So what is the value I should put into? Is 34-j810 (source impedance) or 34+j810 (conjugate matching impedance)? Please help.

Thanks.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top