Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

how to set the enviroment for hspice?

Status
Not open for further replies.

jluhzw

Member level 5
Joined
Nov 15, 2004
Messages
94
Helped
17
Reputation
34
Reaction score
4
Trophy points
1,288
Location
Hangzhou China
Activity points
756
hspice license

Hi everybody
After I install hspice in the RH
and in the .bashrc file set the paht and license
but it could not work correctly
could you tell me how to make the hspice work correctly?

thx!!!

there is the .bashrc file.

# .bashrc

# User specific aliases and functions

# Source global definitions
if [ -f /etc/bashrc ]; then
. /etc/bashrc
fi
PATH=$PATH:/IC5141/tools.lnx86/bin
PATH=$PATH:/IC5141/tools.lnx86/dfII/bin
PATH=$PATH:/IC5141/tools.lnx86/plot/bin
#set the paht
PAHT=$PATH:/usr/synopsys/W-2004.09/hspice/linux
export PAHT
LM_LICENSE_FILE=/usr/synopsys/W-2004.09/hspice/license.dat
export LM_LICENSE_FILE
export LD_ASSUME_KERNEL=2.4.1
export CDSDIR=/IC5141
export CDS_ROOT=/IC5141
export CDS_INST_DIR=/IC5141
export CDS_INSTALL_DIR=/IC5141/tools.lnx86/dfII
export CDS_LIC_FILE=/IC5141/cadence_license_full.dat
export CDS_Netlisting_Mode=Analog

following is the demo.lis


****** HSPICE -- W-2004.09 (20040730) 09:24:51 11/02/2005 linux
Copyright (C) 2004 Synopsys, Inc. All Rights Reserved.
Unpublished-rights reserved under US copyright laws.
This program is protected by law and is subject to the
terms and conditions of the license agreement found in:
/license.txt
Use of this program is your acceptance to be bound by this
license agreement. HSPICE is the trademark of Synopsys, Inc.
Input File: /usr/synopsys/W-2004.09/hspice/demo/hspice/bench/demo.sp
lic:
lic: FLEXlm: v8.4b
lic: USER: root HOSTNAME: localhost.localdomain
lic: HOSTID: 00046168569c PID: 3832
lic: Using FLEXlm license file:
lic: /usr/synopsys/W-2004.09/hspice/license.dat
lic: No such feature exists Feature: hspice License path: /usr/synopsys/
lic: Using FLEXlm license file:
lic: /usr/synopsys/W-2004.09/hspice/license.dat
lic: Unable to checkout hspice
lic:
 

hspice linux license

your license file is not run.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top