Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to see higher modes in HFSS ?

Status
Not open for further replies.
A

Ashubhu

Member level 1
Joined
Sep 20, 2008
Messages
32
Helped
6
Reputation
12
Reaction score
6
Trophy points
1,288
Location
INDIA
Activity points
1,488
Hi all,
I have one problem in HFSS. HFSS solve only 20 modes in eigenmode solver. How can we see other higher order modes which comes beyond 20 modes? suppose TE061 mode i have to see.
How can we filter TE or TM modes from simulation so that at a time HFSS simulates TM or TE modes only????

Thanks in Advance
 

Re: Higher Modes in HFSS

Hi tallface65,

Your discusion before was so helpfull.
But when I did the same thing for lower modes( I expect my first mode will appear from say 200MHz) the solution did not converge even when I changed the minimum frequency in the setup to 100MHz.
should we also change the minimum frequency of the PML setup to be the same like that of the setup.
and if i expect the band gap to start from zero, so what is the minimum frequency that i should use either in the main setup or in the PML.

Sadmad.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top