Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to replace lumped elemts with microstrip in amplifier??

Status
Not open for further replies.

sandeepsreeman

Member level 1
Joined
Mar 28, 2009
Messages
35
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
india
Activity points
1,553
I have designed a microstrip layout of power amplifier at 2.4 GHz. The input and output matching sections have been designed in microstrip.
But my DC bias network is containing lumped components - inductors and capacitors.
I want to replace these inductors and capacitors with microstrip lines so that my complete design is in microstrip layout form.
So please help me with how to replace the lumped inductors and capacitors in my circuit with microstrip lines.
 

Andrew77

Member level 2
Joined
Mar 16, 2006
Messages
53
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Rome
Activity points
1,656
Re: how to replace lumped elemts with microstrip in amplifie

replace a capacitor toward ground with a "open ended" stub and the inductor with a narrow microstrip; after that optimize the dimensions for better performances of the PA
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top