Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
voice signal --> amplify if needed --> analog filtering --> ADC conversion --> digital data stream --> read from ADC --> write to sdCard.
* you need to specify analog input voltage range (for ADC and amplifier, if needed)
* you need to specify analog frequency range (for analog filter and ADC sample rate)
* after each conversion you need to read the digital data and store it to sdCard (maybe you need a FIFO buffer here)
I recommend to read data from ADC and just transmit into FIFO within the ADC_conversion_finished_ISR.
Transmit data from FIFO into sdCard I´d do in main loop.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.