Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

how to model PLL using MATLAB?

Status
Not open for further replies.
dpll simulink

There are some simulink examples from the web.
Go to google and search PLL /DPLL simulink
 

pll in matlab

This is the EXCEL that I am using for some years to see the loop response.
Not very detailed but can be a way without MATLAB
 
pll matlab simulation

Doing in simulink is much easier than in matlab and verilog A.
But for noise modelling u have to go for verilog A.
 

pll model matlab

Is simulink also part of matlab?
 

adpll simulink

how to simulate phase noise using verilog A?
thanks,
 

pll matlab code

buel said:
how to simulate phase noise using verilog A?
thanks,

If you have the feature of HspiceRF then that's a easy thing.
Maybe....spectre (a product of Cadence) also can do that!
 

pll matlab example

shaq said:
buel said:
how to simulate phase noise using verilog A?
thanks,

If you have the feature of HspiceRF then that's a easy thing.
Maybe....spectre (a product of Cadence) also can do that!


hspice is similar to spectre.

for noise simulation we need hspiceRF or spectreRF.
 

pll matlab simulink

well.. its a nice exercise in understanding plls.. u cud start wit 1 order and then move on to 2nd order..

The basic eqn are avilable in comm sys by simon haykin.......
 

pll en matlab

Modeling of Fractional-N division frequency synthesizers with Simulink and Matlab
Brigati, S.; Francesconi, F.; Malvasi, A.; Pesucci, A.; Poletti, M.;
Electronics, Circuits and Systems, 2001. ICECS 2001. The 8th IEEE International Conference on Volume 2, 2-5 Sept. 2001 Page(s):1081 - 1084 vol.2
Digital Object Identifier 10.1109/ICECS.2001.957685

https://ieeexplore.ieee.org/iel5/7591/20705/00957685.pdf?arnumber=957685

Shows a charge pump and PFD simulink model.

-Sam
 

pll matlab modelling

very helpful,i 'm doing such work now.Thanks for your files
 

pll modelling

satyasiva said:
can any one suggest any papers how to model PLL in MATLAB?


see simulink demos
 

pll implementation matlab

this is a simple matlab code for PLL in matlab.
 

pll design in matlab

where is your code chacha

Added after 1 minutes:

pls post your code again
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top