Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Find the S parameters(2 port for differential/1port for single ended) using a network analyzer. The S parameters can be converted to Y/Z parameters. You can start of with a simplified model for the inductor, say a pi model with series resistor, and parallel caps. Try to map the Y/Z parameters to the pi model and extract the inductor,series resistance,parallel parasitic caps and hence Q and self resonant frequency.