Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to make sure that one LDO can be usede in RF circuit?

Status
Not open for further replies.
K

katherine

Newbie level 6
Joined
Jun 2, 2006
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,367
I am doing one RF-LDO according to one series products' SPEC. In the SPEC, there are only several electrical characteristics such as output voltage noise=30uVrms(f=10HZ to 100KHz), Power Supply Rejection Rate=-78dB(f=100Hz) and -73dB(f=1KHz). When my cirucit's pararmeters all meet the SPEC, I can make sure it is OK?Are there other special request or methods?
Thank you in advance!

Katherine
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top