How to make automatic measurements and data logging !!

[matrix1]

Hi all
I need to make automatic measurements and data logging of various parameters of a waveform using Oscilloscope, e.g. Amplitude, frequency, rise/fall time, overshoots etc. Is that possible using a Scope or how should i proceed to record certain events and failures during testing an equipment. Secondly this is manchester bi-phase data so whole frame or at least a word must be record in terms of voltage, freq, Amplitude etc.
Any other suggestion to develop a testing system which can perform various tests on an equipment according to a certain standards. thanks

Zafar

 

[roykyn]

**broken link removed**
**broken link removed**
http://alternatezone.com/electronics/dsoamk3.htm (Parallel port based)
http://www.johann-glaser.at/projects/DSO/
http://www.bitscope.com/ (Old Schematics are availabe for download)
http://www.fpga4fun.com/digitalscope.html (FPGA Based)
__________________

 

[tpj]

You may develop Automated Test Equipment using PXI modules and industry standard leading software like NI Test Stand or NI Labview.

Please refer to the website www.ni.com/pxi for details.

-TPJ