Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How-to make a PCB using Toner Transfer method

Status
Not open for further replies.

phil_jp1

Newbie level 2
Joined
Jun 7, 2011
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,297
Hi guys!

The other day I found that there's almost no good videos on how to make PCB's using Toner Transfer method. So I tried to make one. It doesn't cover all the aspects of PCB making, but it's a good place to start.

With this method you can easily and repeatedly make boards with tracks as thin' as 0.01in (0.254mm) and use chip capacitors and resistors down to 0603 size (0402 for maniacs only).

Here you can find the video and some photos:
http://jumperone.com/2011/06/how-to-make-pcb-using-toner-transfer-method/

Hope you will like it :)
 

Iuri

Member level 2
Joined
May 14, 2011
Messages
50
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,288
Activity points
1,630
Really good job! Nice blog by the way!

Iuri~
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top