Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
More specs are required.
Do you want a 1-phase or a 3-phase? If its 500va then I guess you'd want to gor for 1-phase inverter.
Whats you're DC bus voltage?
What do you need the inverter for? Is it for UPS applications or motor drives applications?
you can use type 16 core 3 inch stack with windings primary 16 + 16 turns for 12v 0 12v using 12 swg
and sec use 330 turns (240v) using swg 20 ( 21 is also ok)
Added after 9 minutes:
thecalculation i have given is for 500w
for 500va around 300w
39 turns center tap for 12 0 12v
using 13 swg
sec 405 turns 240v swg 22 ( 23 will also do )
core type 16 2.5" stack
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.