Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

how to make a 10mH choke coil at home !!!!!!!!!!

Status
Not open for further replies.
First decide what current is supposed to pass through it and then select an enamelled copper wire for the same. Then start winding on a core and measure with a L meter at regular intervals. Example : May be if you stop at 20 turns and you get 1Mh, it means by 200 turns, you'll recah 10Mh.
Cheers
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top