Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to know whether the ASITIC inductor modeling is right?

Status
Not open for further replies.
E

eejli

Advanced Member level 4
Joined
Mar 24, 2004
Messages
115
Helped
1
Reputation
2
Reaction score
2
Trophy points
1,298
Activity points
1,032
asitic inductor

For the PLL, I use ASITIC to model the onchip inductor in vco. How to know whether the modeled inductor Q is right by measurement? I think the VCO Q is different from the inductor Q.

Thanks.
 

asitic inductor

You have to perform inductor characterization by measuring the fabricated inductor. I have attached a paper which describes one method of characterizing on-chip inductors.
 

    E

    eejli

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top