Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to judge the external capacitor value in chip?

Status
Not open for further replies.
S

staric

Member level 4
Joined
Sep 26, 2003
Messages
79
Helped
4
Reputation
8
Reaction score
3
Trophy points
1,288
Activity points
661
Who can tell me how to compare the external capacitor value with a reference value? If the cap is large than the reference, do some operation. And the cap is less than the reference, disable the operation. Such as the RC pin in bq2000.
 

how about charging the cap at some voltage value and compare the discharge through some big R.
iit has exponential behaviour you would be able to predict if the cap is larger or not.
Just a simple voltage comparator would work.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top