Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to interface GSM modem with 89c51 microcontoller?

Status
Not open for further replies.

umikiran

Newbie level 2
Joined
Mar 24, 2006
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,295
hello friends
can any one tell how to interface gsm modem with 89c51 microcontoller
 

Re: regarding gsm modem

i've no experienceand not familiar using 89c51 as i use different type of microcontroller. but if you want to interface your microcontroller with your gsm modem, use the uart interface of the gsm modem and microcontroller. then from there you can control gsm modem from microcontroller by sending at commands...
 

Re: regarding gsm modem

Check the AT commands.

Send AT command through serial port of µC.

:D
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top