Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to interface Garmin GPS 12 XL to PC?

Status
Not open for further replies.
A

alzomor

Advanced Member level 2
Joined
Jun 9, 2005
Messages
674
Helped
39
Reputation
78
Reaction score
8
Trophy points
1,298
Location
Germany
Activity points
6,406
Garmin GPS 12 XL

Hi

I have a Garmin GPS 12 XL.
but it's LCD is broken.
How to interface it to the PC?

Salam
Hossam Alzomor
www.i-g.org
 

Re: Garmin GPS 12 XL

It should have a usb or serial port interface.just connect it to the respective port of the PC with cable and use the software provided with GPS.U can use any other third part software like VisualGPS or just see the raw output (NMEA form )by using the terminal program.
regard...
 

Re: Garmin GPS 12 XL

Hi

Thanks for your reply

My question is

At which buad rate dose it work?

Dose it initially work at NMEA of it may start with another formate.?

What is the pin connection of the serial port?

Salam
Hossam Alzomor
www.i-g.org
 

Re: Garmin GPS 12 XL

Usually it works with the baud rate of 4800 and starndard serial cable. U better see the manual of 12 XL.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top