Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to Interface an Ammter with PLC??

Status
Not open for further replies.

ayyub

Newbie level 6
Joined
Jul 11, 2008
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,384
Hi seniors!
I got a diesel generator with voltmeter rpm meter and ammeter.I want to interface the ammeter with PLC in such a way that when Ammeter reading changes, the analog bits also changes respectively.
 

khongai

Full Member level 4
Joined
May 20, 2005
Messages
230
Helped
16
Reputation
32
Reaction score
11
Trophy points
1,298
Activity points
2,919
ayyub said:
Hi seniors!
I got a diesel generator with voltmeter rpm meter and ammeter.I want to interface the ammeter with PLC in such a way that when Ammeter reading changes, the analog bits also changes respectively.

you can check the control cabinet of genset, some of them can provide some analogue output or communication port ( for modbus, profibus, ... connection) and your plc shold has these connection
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top