Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to install Debussy license in Linux?

Status
Not open for further replies.

realtek

Member level 5
Joined
Mar 15, 2004
Messages
89
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
870
How to Install Debussy Licesne in Linux(Mandrake v10.x)
I tar debussy.tar.gz
then go to bin
type "debussy"
find error

Pls give the detail procedure about how to install License file
I read the installation guild but still don't know how to add license file.
Many Thanks in Advance.
 

Re: Debussy in Linux

first of all, have u got the license from deubssy? i havn't install Debussy in Linux, but i have installed some other eda tool in linux(redhat) before. i think the flow is quite same.

1, cp install file to the directory u want to install.
2, unzip and untar the debussy.tar.gz
3, modify ur license file, for example, if the deamon is cslim, edit license file as follow
DEAMON cslim INSTALL_DIR/flexlm/cslim

and change SEVER line
SEVER hostname hostid

4, start license,
lmgrd -c license.dat -l lic.log

hope this helps
 

Debussy in Linux

i use debussy53v3 ,if run debussyy will report checksum error,but i use lmgrd -c license.dat
it will work well.
 

Re: Debussy in Linux

realtek said:
How to Install Debussy Licesne in Linux(Mandrake v10.x)
I tar debussy.tar.gz
then go to bin
type "debussy"
find error

Pls give the detail procedure about how to install License file
I read the installation guild but still don't know how to add license file.
Many Thanks in Advance.

It seems like you are rushed to execute it without modified your shell...
Anyway, if you are doing so, please use ./debussy right after prompt not debussy.
As lic problem, please follow guide from xworld2008, or jizhian.
Or, you may have to provide more what's going wrong in detail...

Regards,
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top