Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to import .prm file that is a parameter file for a BJT into cadence virtuso ?

Status
Not open for further replies.

Shoko_

Newbie level 1
Joined
Mar 5, 2015
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
6
Hi guys,

I have a .prm extension file of a BJT that I need to import in cadence virtuoso schematic for simulation.
Is there any way similar to uploading the S2p file in a port, for the .prm extension file?

Thank you,

Best,
Shoko :)
 

If the model is a standard SPICE model and if you use IC6.16 you can import this model directly in ADE.Virtuoso will recognize the model without any tweaks.But if the model file ( generally text file ) has some different options than SPICE format, you may have to do some simple tweaks.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top