Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to hack cheap Smart Tweezers to add voltage measurement

Status
Not open for further replies.

projectleader

Newbie level 1
Joined
Aug 21, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
smart tweezers

Hi All,

I'd like to offer this project for your approval. You can buy these low-cost smart tweezer DMM for <$20USD but initially they can only measure R/C/Diode. By changing a logic line and rerouting an analog line you can enable the voltage measurement mode on the DMM chip to get a better tweezers for almost free!

Too big to paste here, so here is the link:

**broken link removed**

Let me know what you think!
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top