How to get Transient simulation from this circuit and AC phae plot

Status
Not open for further replies.
D

Devi92

Newbie level 5
Joined
Dec 2, 2017
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
69
From this code, I got DC/AC plots but I can't get AC phase plot,
1.what should I need to do to get the AC phase plot?
2.For transient, I have to put two resistors in this code I don't know where can I put in it.
anybody knows?
Code: 
* Low current dual stage operational amplifier
M1 2 2 1 1 CMOSP L=5U W=25U
M2 0 0 2 1 CMOSP L=50U W=5U
M3 3 2 1 1 CMOSP L=5U W=25U
M4 4 9 3 1 CMOSP L=5U W=75U
M6 5 10 3 1 CMOSP L=5U W=75U
M5 4 4 0 0 CMOSN L=5U W=10U
M7 5 4 0 0 CMOSN L=5U W=10U
M8 6 2 1 1 CMOSP L=5U W=50U
M9 6 5 0 0 CMOSN L=5U W=40U
C1 5 6 0.5PF
* CLOAD 6 0 10PF
VDD 1 0 DC 5.0
* v- 9
* v+ 10
* vout 6
* Vdd 1
* These SCN-2.0um parameters taken from MOSIS
.MODEL CMOSN NMOS LEVEL=2 LD=0.250000U TOX=408.000001E-10
+ NSUB=6.264661E+15 VTO=0.77527 KP=5.518000E-05 GAMMA=0.5388
+ PHI=0.6 UO=652 UEXP=0.100942 UCRIT=93790.5
+ DELTA=1.000000E-06 VMAX=100000 XJ=0.250000U LAMBDA=2.752568E-03
+ NFS=2.06E+11 NEFF=1 NSS=1.000000E+10 TPG=1.000000
+ RSH=31.020000 CGDO=3.173845E-10 CGSO=3.173845E-10 CGBO=4.260832E-10
+ CJ=1.038500E-04 MJ=0.649379 CJSW=4.743300E-10 MJSW=0.326991 PB=0.800000
.MODEL CMOSP PMOS LEVEL=2 LD=0.213695U TOX=408.000001E-10
+ NSUB=5.574486E+15 VTO=-0.77048 KP=2.226000E-05 GAMMA=0.5083
+ PHI=0.6 UO=263.253 UEXP=0.169026 UCRIT=23491.2
+ DELTA=7.31456 VMAX=17079.4 XJ=0.250000U LAMBDA=1.427309E-02
+ NFS=2.77E+11 NEFF=1.001 NSS=1.000000E+10 TPG=-1.000000
+ RSH=88.940000 CGDO=2.712940E-10 CGSO=2.712940E-10 CGBO=3.651103E-10
+ CJ=2.375000E-04 MJ=0.532556 CJSW=2.707600E-10 MJSW=0.252466 PB=0.800000
* To run the specific set of simulations, edit out the appropriate
* section's comment columns (*).
* DC Transfer Characteristic: 2.0 Volt Offset
vplus 10 0 dc 2.0
vminus 9 0
.dc vminus 0 5 0.1
* AC Transfer Characteristic: 2.0 Volt Offset
*vplus 10 0 dc 2.0
*vminus 9 0 dc 2.0 ac 1e-6
*.ac dec 10 100 1e9
* The following "probe" line is for those using PSPICE with PROBE Option
* .probe
.end
 

I need command to get the AC phase plot . I don't know to do it. If you know, let me know how to do. For transient, I have to put two more reistors in this circuit diagram. But I don't know where to put.
 

There is no stimulus signal for both AC and Transient Analysis.

Devi92 said:
I need command to get the AC phase plot.
I don't know to do it. If you know, let me know how to do.
Click to expand...
Simpy, do AC Analysis.
Here AC stimulus signal is required.

Devi92 said:
For transient, I have to put two more reistors in this circuit diagram.
But I don't know where to put.
Click to expand...
There is no stimulus signal.

Can you understand Transient Analysis ?
 

Attachments

  • 180116-225636.png
    50.6 KB · Views: 78
  • 180116-230735.png
    22.9 KB · Views: 83
Last edited:

I got a AC magnitude plot but I don't know I didn't get the AC phase plot, I got but wrong number in Y-axis. In my document there is a instruction to do the transient with this command. but I have to add two resistors in it diagram.
Code: 
vplus 10 0 dc 2.0 
vminus 9 11 dc 2.0 
vpulse 11 0 PULSE (-2 2 5e-6 0 0 e-6 1e-5) 
.tran 1e-7 2e-5
 

Devi92 said:
I got a AC magnitude plot but I don't know I didn't get the AC phase plot, I got but wrong number in Y-axis.
Click to expand...
Surely read SPICE document you use.

Devi92 said:
In my document there is a instruction to do the transient with this command. but I have to add two resistors in it diagram.
Click to expand...
Construct inverted feedback amplifier.
 

Attachments

  • 180116-231601.png
    6.5 KB · Views: 87

Thank you for your help. But I really didn't understand what I have to do more :sad: Teacher didn't say the value of the resistors just saying two resistor.
 

For me this software is new to me, I don't use anysoftware before. That course also new to me.This level will be easy for you but for me not. Maybe For me,highschool level would be easy.
 

I don't know how to make transient is lack of circuit knowledge. But for the AC phase plot not concern with it I think. I tried but I didn't get the correct Y-axis
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…