iVenky
Advanced Member level 2
- Joined
- Jul 11, 2011
- Messages
- 584
- Helped
- 37
- Reputation
- 76
- Reaction score
- 35
- Trophy points
- 1,318
- Location
- College Station, Texas
- Activity points
- 6,124
I thought the output voltage in the buck converter is primarily decided by the duty cycle (Vout=DVin)but after simulations I found that it depends on the load resistor (or in other words the load current) too. Is there any formula that tell you the effects of the load?
Thanks a lot.
Thanks a lot.