Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to find or measure dVi/dt of input signal in HSPICE and Current Source Model

Status
Not open for further replies.

Sapna_k8

Newbie level 3
Newbie level 3
Joined
Feb 21, 2013
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,304
Hi all..:)

I am trying to pre characterize a cmos inverter through current source models in HSPICE. For that i need to implement some equations.

One of the equation is

i0+ I(Vi,Vo)-Cm(Vi,Vo)dVi/dt=0

I found the i0 and I(Vi,Vo), now i need to find Cm....but before that i have to find dVi/dt of input signal....i tried it thru .measure deriv command of HSPICE. But couldnt succeed.
I am posting code here...

*code for slewrate characterization

vdd 3 0 1v
vdd1 4 0 1v
vch1 1 0 pwl(0 0 2n 0 10n 1v 100n 1v 110n 0)
vch2 6 0 0.1v
v1 2 6 0v
m1 2 1 3 3 pmos l=2u w=90u
m2 2 1 0 0 nmos l=1u w=45u
m3 5 6 4 4 pmos l=2u w=360u
m4 5 6 0 0 nmos l=1u w=180u

.lib "45nm_model" cmos_models

.tran 1n 100n sweep vch2 0 1v 0.1v

.MEAS tran s DERIV vch1 from=1ns to=100n


.plot
.probe

.option post
.end

Please help me out in this matter.....and if anybody has any idea about implementation of current source model..then please guide me....

Thanks for your time...

Regards

Sapna:)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top