How to draw and excite an impedance helix in HFSS?

Erick_Lopes · Mar 18, 2010

Hi friends!!
I´m new in HFSS and
I´m make a helix antenna for 2.45Ghz in HFSS and i´ve to make the feed, the excitation, but i saw the HFSS user guide and i draw the coax, if i change the lenght of the coax change the input impedance, how can i draw the coax with the correct lenght for this frequence?? or how excitate my antenna with the corrects parameters for this frequency??

i´m posting the draw of my antenna

Thank you!!

myemworld · Feb 3, 2011

Hi Erick_Lopes,

I realize that it has been a while after you have submitted your question. I just want to make sure you have seen the "Helical Antenna" example created by Ansoft. As you may have seen you can can add a feed pin at the bottom of the helix and then feed it with a wave port backed by a copper box(you do that to be able to add the wave port internally).

I hope this helps.
Joline

ruchak · Jun 10, 2012

myemworld said:
Hi Erick_Lopes,

I realize that it has been a while after you have submitted your question. I just want to make sure you have seen the "Helical Antenna" example created by Ansoft. As you may have seen you can can add a feed pin at the bottom of the helix and then feed it with a wave port backed by a copper box(you do that to be able to add the wave port internally).

I hope this helps.
Joline

can you elaborate this?

How to draw and excite an impedance helix in HFSS?

Erick_Lopes

Newbie level 1

myemworld

Junior Member level 2

orle

ruchak

Junior Member level 2

ferdows

Similar threads

How to draw and excite an impedance helix in HFSS?

Erick_Lopes

Newbie level 1

myemworld

Junior Member level 2

ruchak

Junior Member level 2

Similar threads

Privacy & Transparency

Privacy & Transparency