Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to do simulation in ads for both analog RF and DSP?

Status
Not open for further replies.

jsp

Member level 3
Joined
Sep 21, 2001
Messages
57
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
314
simulation using ads

how to do the simulation in ads for both analog rf component and dsp component like d- flip flop simultaneouly.

pl help in this regard.
 

Re: simulation using ads

To include an analog circuit in the digital environment, you should define a symbol containing this analog circuit and an envelope simulation icon. In the digital environment, use this icon. Also, it should be followed by an Env Out icon. It's not a very intuitive environment as you will probably quickly discover...
 

Re: simulation using ads

any example is there for that
 

Re: simulation using @DS

jsp said:
how to do the simulation in @DS for both analog rf component and dsp component like d- flip flop simultaneouly.

pl help in this regard.

OPtions->Advanced Design Design System Setup

select radio button: Both with Default -> Default is Analog/RF or DSP but design type can be both.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top