Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to do DC analysis of open loop OTA

Status
Not open for further replies.
V

vhdl00

Junior Member level 2
Joined
Nov 30, 2005
Messages
22
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,501
dc analysis of OTA

Hi all,
I am trying to do dc analysis of open loop OTA. at the beginning I was doing dc differential sweep to make sure all the device working in saturation region, after I has been told to use CMFB to set up the operation point, I am kind of confused: how to choose Vcm , do we have to choose it randomly? or we have to do dc common mode sweep to find it ?

Thanks.
 

Re: dc analysis of OTA

Vcm is chosen as half way between VDD and VSS.
 

dc analysis of OTA

In gray's book, the last chapter discuss how to design full differential OPAM. I think it will help you to chose the vcm of the OTA.
 

dc analysis of OTA

at the middle point of half swing
 

Re: dc analysis of OTA

Start with the middle point of the swing and sweep.Because you can't match well the size of pmos and nmos.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top