Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to do a remote object tracker using GPS receiver module?

Status
Not open for further replies.

sai_kiran

Newbie level 5
Joined
Jun 28, 2004
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
115
help in gps

i am planning to do a remote object tracker.

provided i have an gps receiver module how do i start.

please help me in this.i plan to have the entire project for discussion in this forum.
8)
 

Re: help in gps

hi..
view topic..

EDAboard.com Forum Index -> Hobby Circuits and Small Projects Problems->Communication based Project
 
Re: help in gps

sai_kiran said:
i am planning to do a remote object tracker.

provided i have an gps receiver module how do i start.

please help me in this.i plan to have the entire project for discussion in this forum.
8)

hi sai_kiran,

for your project, you will need a GPS module and a GSM OR GPRS module. basically for GPS, it is purely a receiver that tells you your actual position, speed, altitute etc...and inorder to track the object, you will need these information to be transmitted over air to a "command centre".For transmission, a simple GSM/GPRS module will do the trick, depending on how you would want to use this set of information, you could also program a microcontroller to control the I/O of these information.

A write-up is available on the Maxim website:
**broken link removed**

have a look. 8)
 

Re: help in gps

Hi,
U need two wireless modems ( I use Wavecom GSM). Interface one of the Modems to GPS thru' a UC and then at the receiver end you may directly connect it to the PC/other RS232 host.
B R M
 

    V

    Points: 2
    Helpful Answer Positive Rating
help in gps

you need to select a cpu and expand uart The system need 3 UART , one for gsm/gprs /cdma the second for the gps module the third / OR USB to pc

8051+ 16c554 + gps (module)+ mc35i/G18/tc35i

I finish the system ,now expanding a video frequency
 

help in gps

now figure on exchanging cpu (sharp 75401)
 

Re: help in gps

Hi
Has anyone used CDMA modems? Is it available?
B R M
 

Re: help in gps

hi,

this link will help you :
**broken link removed**
bye

Fire in the Wire :sm2:
 

Re: help in gps

Hi All!

Wavecom has now a new GSM/GPS engine, type:2501
Try this, you can prgram also the GPS with AT command.
denesg
 

Re: help in gps

What is price in 10 of them?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top