Sir Barry when recording I use 8 bit Depth and Sample Rate 16000Hz then I saved it in 8bit, 11025Hz format, it always cut in almost half of the audio and i have no Idea about the formula that I'm going to use Sir Klaus
Correct me Sir If I'm wrong,
My project is I am putting 3 different kinds of sounds inside EPROM 1st is demo sounds, 2nd is warning sounds, 3rd is main sounds
I have no idea about it, I've just learned programming of audio through searching, then through observation and reading I conclude that every pins (A0-A17) has a different amount of memory I mean different address inside the eprom but when I try to remove A1 to A17 and remain A0 I assumed that the A0 will only play its holding memory but im wrong it played the whole audio. If you'd mind sir can you explain it to me why it happens like that.
Sorry for my english hard to compose english paragraph...
- - - Updated - - -
Si Klauss I read your Explanation about microprocessor "Address Mapping, Address Decoders, address counters, MSB address, LSB addresses" I would like to ask how to determine the address lines inside EPROM the Memory 4mbit(512kbx8)