How to design simple 5.1GHz yaugi uda antenna on PCB( printed circuit board)

[farrukh_tahir]

Does anyone know how to design a yagi antenna at 5.1 GHz on PCB . plz i need full calculations and pcb Circuit as well Thnaks

 

[varuniyengar]

yagi is not for pcb design!!

 

[muthukumar_ece2004]

yagi is not for pcb design!!

How did you say this?
In some applications Yagi antenna used in Strip-lines for receiving GHz of frequency range!

 

[varuniyengar]

Yagi might be stripline fed

---------- Post added at 11:16 ---------- Previous post was at 11:05 ----------

Yagi on stripline is not for UWB application

 

[ferdows]

hi
u can this papers from IEEE about microstrip yagi antenna
1-A New High-Gain Microstrip Yagi Array Antenna With a High Front-to-Back (F/B) Ratio for WLAN and Millimeter-Wave Applications by Gerald R. DeJean, Student Member, IEEE, and Manos M. Tentzeris, Senior Member, IEEE
IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, VOL. 55, NO. 2, FEBRUARY 2007
2-A Printed Microstrip Yagi Antenna Array for Millimeter-Wave Multi-Sector Applications by G. DeJean and M. M. Tentzeris
3-Design and Analysis of Microstrip Bi-Yagi and Quad-Yagi Antenna Arrays for WLAN Applications by Gerald R. DeJean, Member, IEEE, Trang T. Thai, Student Member, IEEE, Symeon Nikolaou, Student Member, IEEE, and Manos M. Tentzeris, Senior Member, IEEE IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, VOL. 6, 2007

 

[aze]

it is called Quasi yagi antenna, there are some papers and other ressources on the subject, just google it.

 

[volker_muehlhaus]

microstrip yagi antenna

Microstrip implies that you have a signal line over a big ground plane.

PCB does not mean Microstrip. I think the question refers to PCB yagi antennas like this:
Amazon.com: Directional Yagi PCB Antenna, 2.4 GHz WiFi, 8.5dBi Forward Gain, Assembled & Tested: Electronics

 

[YAS_HASHI]

You can see some examples on
2.4Ghz Yagi Antenna for WIFI – using single sided PCB board « estqwerty's DigDice diy wifi antennas
Yagi Style Printed Circuit Board Antennas

To calculate characteristics of antenna, MMANA(free software) is very easy.
But it's not for an antenna on PCB. If effects of PCB can be neglected, you should use it.

 

[ferdows]

hi volker_muehlhaus
that true we have another kind of yagi antenna but PCB a kind of microstrip and not deffer between them

 

[PCB4U-Chingya & Pikha]

Want to make a PCB ?

We can make a PCB for you within 4 weeks after the relevant drawing is confirmed .

it only needs CAD$80 -100 for palm size custom PCB including shipment and soft-tooling cost .

Our experts have 5-10 years experience in this field, they will work together with you closely to give a proper solution from product design to manufacturing.

:lol:you can contact us through this email box : pcb4u@pikha.com.


Pikha & Phoenix

 

[davenn]

yagi is not for pcb design!!

Yagi might be stripline fed

---------- Post added at 11:16 ---------- Previous post was at 11:05 ----------
Yagi on stripline is not for UWB application

Dont say it cant be done.... You had better go and do some research

I have several wideband 2 - 11GHz yagis made on PCB and they work well!!

Dave

 

[hamidrezakarami]

To find some useful information, you can check 2.4Ghz Yagi Antenna for WIFI – using single sided PCB board « estqwerty's DigDice diy wifi antennas