Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to design non-longitudinal slot antenna (slotted waveguide/siw)?

Status
Not open for further replies.

Terminator3

Advanced Member level 3
Joined
Feb 25, 2012
Messages
802
Helped
71
Reputation
142
Reaction score
63
Trophy points
1,308
Activity points
9,027
I can't find any good reference on non-longitudinal slot arrays. Most information is given for longitudinal slot arrays (admittance is analyzed)) and inclined slots. Slot is perpendicular to waveguide longitudinal axis. How to characterize such slot? Only a little information in few papers on leaky-wave antennas. I am interesting in this topics:
1) power division between non-longitudinal slots
2) matching (equivalent circuit for non-longitudinal slot, similar to admittance of longitudinal slots)
 

Hi Terminator3,

I guess you are telling slots like "f" and "g" in this figure (waveguide in TE10 mode). Right?

slots1.png

There is a bit of information in "Modern Antenna Design, 2nd Edition" by Thomas Milligan (Wiley-IEEE Press, 2005), section 5-24 .
(I saw more information in some other book, but now I don't remember which one.)
 
Antenna Engineering Handbook, 4th Edition - Volakis (Editor), Mc-Graw Hill, 2007. Chapter 9: Waveguide Slot Antenna Arrays.

Alternatively: (same title), 3rd Edition - Johnson and Jasik (Ed), McGraw-Hill, 1993.Chapter 9.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top