Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to design coplanar strip line (CPS,) in ads

Status
Not open for further replies.
Sort by date Sort by votes
There are no coplanar circuit simulation models in ADS, but you can use EM-based design tools:
"Controlled Impedance Line Designer" will help to find proper cross section. See online help for more details on CILD. When you have determined dimensions based on line imepdance, you can analyze the actual layout in Momentum.

Momentum EM simulation can use a special "slot" analysis mode if your CPW line is simulated with zero thickness (flat conductor), or you can analyze as regular metal that is solved for conductor currents.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top