Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to design an antenna to operate at 3 and 5 GHz?

Status
Not open for further replies.

cehan

Junior Member level 2
Junior Member level 2
Joined
Jun 2, 2013
Messages
21
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,428
i am working on microstrip patch antenna...i gonna design antenna to operate at 3 and 5 GHz...but my design gives just 2.3 and 4.5....i want to shift or modify s11 to the desired values 3 and 5 GHz..
is there any suggestion to solve such case....
here attachment for s11 graph on hfss 15.
 

Attachments

  • Untitled.png
    Untitled.png
    61.9 KB · Views: 149

If you want to get two resonance with patch antenna, the best way would be to first design a patch resonating at 3 GHz and then add a slot to make it dual band. The dimensions of the slot can be so adjusted that the antenna has a second resonance at 5 GHz
 

thnx a lot Umar608 the substrate thickness and material type were the most important parameters.
 

it s impossible to achieve this BW at this frequency
try other antenna
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top