How to defined GLCD using MIKROC FOR BEGINNER.

[alimemory]

I want to learn how to defined GLCD module connection e.g USING Nokia 3310 screan.
Using MikroC.
I need an explain on this what means?
TRISB = 0x00;
PORTB = 0x00;
THANKS

 

[embpic]

TRISB register defines that PORT will be work as input or output.
any TRISx and x is any any port like A,b,c,...

and PORTB = 0x00;

Means this port will work as ouput.

- - - Updated - - -

if u assign
PORTB = 0xff;
then port will work as input.

 

[alimemory]

What about GLCD?
Thanks

 

[embpic]

yes u can interface using any port for GLCD. But mostly use single port for sending data to GLCD and use control signals from other port.

- - - Updated - - -

what kinda help u want for GLCD.