Makni
Junior Member level 1
Hi everybody,
I designed a multi Microblaze processor system with four Microblaze processors using the board ML507 using the Xilinx EDK Project. My goal is to create a Microblaze-based multiprocessor system on chip interconnected using a Network on chip (NOC) with a mesh topology.
Can you help me please.
Thanks in advance.
I designed a multi Microblaze processor system with four Microblaze processors using the board ML507 using the Xilinx EDK Project. My goal is to create a Microblaze-based multiprocessor system on chip interconnected using a Network on chip (NOC) with a mesh topology.
Can you help me please.
Thanks in advance.