Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to control "primitive" for orcad pcb netlist export?

Status
Not open for further replies.

bnevins

Member level 1
Joined
Jul 25, 2015
Messages
32
Helped
1
Reputation
2
Reaction score
1
Trophy points
8
Activity points
250
I am using orcad to generate a pcb netlist for Design spark pcb.

Parts that are simulated with a subcircuit (opamps) have primitive = no for simulation, primitive = yes for pcb netlist. This controls the hiearchy descent in the netlist generation. Is there a way to
get proper netlists without altering this property for every part that has a simulation subcircuit?
 

HasHx

Member level 4
Joined
Oct 17, 2016
Messages
78
Helped
14
Reputation
28
Reaction score
14
Trophy points
8
Location
Amman
Activity points
642
Hey there

i have never faced this problem before, i always have my parts primitive property set to default and it works just fine! if you dont want to set each part to primitive individually, just select your design then click edit all objects properties and use excel sheet to mark them... you'll need 3 clicks only for your whole design.

But if you have a reason to keep that property determined please tell.

Ciao!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top