Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to connect & send signal to PC from Pic18f4550

Status
Not open for further replies.

sign up

Newbie level 6
Joined
May 13, 2011
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,385
hello all,

Can I know whether pic18f4550 come along with driver itself inside the pic chip? Or do I need to download the driver from somewhere else. Btw, how much is the price for pic18f4550?

One more question, if I wish to connect my PIC18F4550 (which carrying data/signal from temperature hardware)to my pc, what type of usb cable require? Is it similar to the usb cable which our mouse using? Or we need some type of usb cable to connect to pc.

in my case, i dint use any external power source, i directly use the power supply provided by the usb.



any of your comment and help is much appreciated!:grin:

thanks!
 

ckshivaram

Advanced Member level 5
Joined
Apr 21, 2008
Messages
5,070
Helped
2,149
Reputation
4,304
Reaction score
2,089
Trophy points
1,393
Location
villingen (Germany) / Bangalore
Activity points
30,097
you need a serial cable if you use the UART, or USB cable if using USB port.

drivers are there for both , but you have to configure the registers and use it as per your requirement.....

i feel the mode of communication has to be decided by you....
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top