Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to communicate with Nokia phones?

Status
Not open for further replies.

minos

Member level 1
Joined
Jul 11, 2002
Messages
32
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
192
nokia phone

someone has tried to comunicate whit a nokia cellular phone???
i'm tryng to comunicate with a nokia 3320(3360),5120 and 6120
and i have some troubles, i made my own cable
 

Hello

What is wrong? Which cable do you have? What do you want do with phone (unlocking, logotips,...)
 

nokia sms

the cable is ok, i think i get comunication with the 5120 only
i want to send sms message tru microcontroller

thanks for you help
 

Hi, minos
Have a look at this topic:

**broken link removed** protocol

It may be helpful to you for sending SMS through GSM phone. In fact GSM phone acts like modem and you can send AT commands to it using simple terminal program.

best regards
 

Do somebody knows how to communicate with a Nokia 5120/6120 phone to dial numbers, and make a normal communication????

How can I get the audio externaly, to connect it -for example- with a Soundblaster?

What about the battery charger?

:oops:
 

audio data could only be transferred analog via the pins normally used for hands-free sets, so u have to make an adapter to the line in of the sound card.

the battery charging status could be requested by "at+cbc" and is not nokia specific.
the document containing all AT commands interpreted by nokia phones is attached
 

Hello!

Are this commands working also on 5110 FBUS?

Regards!
 

i dont think so .. nokias older phones used a proprietary protocol
**broken link removed**
it works if u use nokia data suite which converts the at commands

HTH
dsp_
 

nokia sms

Ok thanks to all
let me try with this info
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top